The ETCS aims to introduce a single harmonised system of signalling, control and train protection that would replace the many incompatible safety systems that currently exist on European railways, particularly on high-speed rail lines. It is an EU legal requirement that all new, upgraded or renewed tracks and rolling stock within the European rail network should adopt ETCS.
However the rollout of ETCS, which is divided into four distinct levels (ETCS 1-4), has been a major concern for train manufacturers and railway infrastructure managers. This has been due to a variety of reasons, including various interpretations in the specification of the system’s behaviour, available laboratory certification procedures not being able to fully address all of the system’s needs, long and expensive field-testing, and other technical difficulties.
The EATS project aimed to develop new on-board location systems by combining Global Navigation Satellite Systems (GNSS), Universal Mobile Telecommunications System (UMTS) and Global System for Mobile Communications – Railway (GSM-R) technologies, as well as including multi-antenna configurations on the train. This would allow for the migration from ETCS level 2 to level 3 which would improve the overall efficiency of European railways.
To design, implement and evaluate the new location systems, EATS has utilised the innovative ATLAS (Advanced Train LocAtion Simulator), which is modular, extensible and highly configurable. It allows for the configuration of the train to be analysed together with the on-board location systems and even for the train’s route to be studied. Moreover, it provides a powerful performance evaluation tool that allows visualising the results of hundreds of simulations at a glance.
EATS used ATLAS and its four specific modules to automate the testing of different antenna distributions applied to a train model under several performance zones. In addition to this, positioning algorithms and different technologies used for positioning have been tested to allow the comparison of their performance and suitability for the railway sector.
For more information: www.sesino.it
